Current Category
Cooling > Watercolling > Barbs, Tubing, Connectors

PLEASE CALL OR EMAIL FOR STOCK AVAILABILITY
sales@allneeds.com.au or 08 8211 8661

Swiftech Smartcoil Tube Wrapping 1/2" Green (40" Length)
	Smartcoils are extruded PVC coils designed to be wrapped around soft vinyl and thin wall tubes to eliminate tube kinking and flattening in medium to sharp bend areas. Smartcoil features & advantages: Performance - Smartcoils do not restrict flow rate compared to the use of internal springs. Reliability - Smartcoils completely eliminate flattening of the tubes over time and allow you to bend soft tubing at sharp radii without kinking. The sharpest possible radius is achieved by spacing the coils close to each other (3/16"). Minimum bending radius for 1/2" Coolsleeves is 1.25" and for 5/8" Coolsleeves is 2.5". Convenience - Smartcoils can be used with existing 1/2" OD tubing systems to reshape tubes that have flattened over time without disassembling the system. Smartcoils 625 now allow users of 7/16" or 1/2" ID tubing to use "thin wall" 5/8" tubes instead of 3/4", for a significant reduction in clutter inside the chassis and radii that were absolutely impossible to achieve with 3/4" tubing.

Swiftech 1/4" BSPP by 1/2" Barb **Eurostyle Short** (2 pack)
	These high-polish chrome plated brass barb fittings feature a captive o-ring. This design requires a flat mating surface, and thus does not necessitate the presence of an o-ring groove in the mating part surface to make the seal. The overall barb & body length is shorter than usual, in order to provide sufficient clearance between VGA water-blocks in triple SLI configurations. The fitting material is high polish chrome plated brass, the thread is 1/4" BSPP (G1/4) and barb size is 1/2 ". The seal is a captive o-ring and the the o-ring material is Buna-N.

Swiftech 1/4" BSPP by 1/2" Barb Fitting (2 pack)
	The 1/4" BSPP by 1/2" Barb Fittings are Fitting chrome plated brass with a Thread of 1/4" BSPP (G1/4) and Barb size of 1/2". The seal is o-ring, a design which necessitates an o-ring groove in the mating part, the Groove design is 16 to 16.5 mm OD x 1.5 to 1.75mm Depth and the O-ring material is Buna-N. These barb fittings are compatible with all Swiftech water-blocks using the NPSM standard, such as Apogee, Apogee GT, MCW60, MCW30. This high-polish chrome plated brass 1/2" barb fitting is specially designed (tall body) to fit inside of the fill-port or alternate outlet cavity of the MCRES Micro Rev 2 and to facilitate the use of a 5/8" socket to fasten the fitting.

Swiftech 1/4" BSPP by 3/8" Barb **Eurostyle Short** (2 pack)
	These high-polish chrome plated brass barb fittings feature a captive o-ring. This design requires a flat mating surface, and thus does not necessitate the presence of an o-ring groove in the mating part surface to make the seal. The overall barb & body length is shorter than usual, in order to provide sufficient clearance between VGA water-blocks in triple SLI configurations. The fitting material is high polish chrome plated brass, the thread is 1/4" BSPP (G1/4) and barb size is 3/8 ". The seal is a captive o-ring and the the o-ring material is Buna-N.

Swiftech 1/4" BSPP by 3/8" Barb Fitting (2 pack)
	The 1/4" BSPP by 3/8" Barb Fittings are Fitting chrome plated brass with a Thread of 1/4" BSPP (G1/4) and Barb size of 3/8". The seal is o-ring, a design which necessitates an o-ring groove in the mating part, the Groove design is 16 to 16.5 mm OD x 1.5 to 1.75mm Depth and the O-ring material is Buna-N. These barb fittings are compatible with all Swiftech water-blocks using the NPSM standard, such as Apogee, Apogee GT, MCW60, MCW30.

Swiftech F Style 1/2" to 1/4" Branch
	The "F" Style 1/2" to 1/4" branch fittings are a convenient alternative to "Y" and "T" connectors. They are used to link two water-blocks in parallel using dissimilar tubing sizes. The F fittings are made of POM (Acetal Copolymer). The advantages of these barb fittings compared to Y's or T's are: Cleaner routing of the tubing, reduction from "large" tubing size such as 1/2" or 3/8" to devices installed in space constrained areas and necessarily requiring 1/4" ports & minimal pressure drop.

Swiftech F Style 1/4" to 1/4" Branch x2
	The "F" Style 1/4" to 1/4" branch fittings are a convenient alternative to "Y" and "T" connectors. They are used to link two water-blocks in parallel using dissimilar tubing sizes. The F fittings are made of POM (Acetal Copolymer). The advantages of these barb fittings compared to Y's or T's are: Cleaner routing of the tubing, reduction from "large" tubing size such as 1/2" or 3/8" to devices installed in space constrained areas and necessarily requiring 1/4" ports & minimal pressure drop.

Swiftech F Style 3/8" to 1/4" Branch x2
	The "F" Style 3/8" to 1/4" branch fittings are a convenient alternative to "Y" and "T" connectors. They are used to link two water-blocks in parallel using dissimilar tubing sizes. The F fittings are made of POM (Acetal Copolymer). The advantages of these barb fittings compared to Y's or T's are: Cleaner routing of the tubing, reduction from "large" tubing size such as 1/2" or 3/8" to devices installed in space constrained areas and necessarily requiring 1/4" ports & minimal pressure drop.